Add a Sparkle to Your Fiat 500 Key Fob
These cute Silicone Covers will add a little excitement to your Fiat 500 Key fob. They are simple to install and snap on in place of your original black cover.
The silicone covers protect the car keys from splashes, dust and other contaminants. They also make your keys look more stylish. just click the next article emitted by the remote control for your key are not blocked and are perfectly compatible when the cover is on.
Guards your key from dust and splashes
Add a little flair to your key by using this silicone cover. It fits perfectly around the key fob, and does not slip. It also shields your key from splashes and dust. The cover's silicone material will not affect the signals that are sent by your key remote, which means you can continue to use your key fob buttons as normal.
Accessorize your Fiat 500 in Grey or Black with these cool covers. These covers are ideal when your original cover is appearing damaged, scratched, or scratched. The covers are made from high-quality silicone and come with 2 key rings, so they can be swapped out to change colours if you're bored of the same colour.
These covers are designed to replace the black stock key cover that came with your vehicle. It is necessary to remove the original key cover first before you can install these covers.
Great look!
Fiat are a truly unique and recognizable Italian brand and their cars sport a unique style that sets them apart from the rest. These dazzling car key covers are a simple and enjoyable way to add a little glamour to your keys without becoming too overwhelming. They look stunning on your key fob, and can be used to revive a worn-out one.
The covers are designed to replace the original black cover and they snap into place with ease. It is best to take off the original cover prior to installing the new one.
They are available in Grey and black and the fiat logo is printed on both. So if you change your preferences, you can switch it up! These are also great gifts for Fiat 500 drivers.
Easy to install
Fiat 500 key covers are an easy way to refresh your car keys. You can pick from a wide range of colors and styles to find the one that matches your style. The greatest thing is that they're simple to install, meaning you can do it yourself within a matter of 10 minutes. You'll need a screwdriver, and some patience. The first step is to remove the old cover from your key. This needs to be removed before the new cover can be put in place.
After removing the old cover After removing the cover, you can use a flathead to pry the four main attachment clips out of the passenger side of fob assembly. These are marked in red on the photo below. Also note the locating tab slots shown in yellow that need to be disengaged in addition.
Replace the battery with a #CR2032 coin cell battery. Make sure that the "+" positive side of the battery is aligned to the opening of the fob, and that the -" negative side is facing toward the rubber buttons.
Re-attach the passenger side mirror cover by aligning the tabs that locate it. Once you've done that take the fob for the driver's side back into your vehicle and test it. Press the button at the front of the key. If everything works as it should your car will turn on the parking lights and the doors will automatically lock.
Easy to remove
Fiat 500 Key Covers are a great way to update your key fob. They're easy to put on and give a unique look. They shield your key fob against dirt, scratches, and smudges. But, before you install a new cover for your key, you must remove the original cover from your vehicle.
This can be done by pressing the red "Fiat" button located on the front of your key fob. When you press the button, an unlatching lever will be released that lets you slide out the ignition switch made of metal (1). After removing the key, you will be able to see the small silver-colored round switch that has images of an unlocked and locked padlock on top of it. This is the battery switch on the key fob. The battery is easy to replace by turning the switch for a quarter turn with a small flathead screwdriver.
The key fob has an embedded microchip that's used to communicate with the Body Control Module (BCM). When you insert the key into your Fiat car, it presses a button on the ignition switch, which is used as a "key-in-ignition" reminder. The BCM will then read the transponder on the key fob to verify the validity of the key.
You can also add a design twin pack to your key covers to give it an unique and funky appearance. The covers snap onto your original cover. They are available in Cream or Silver. The key cover will only work if the original black cover is removed from your key fob.